 |
|
FTC-1 & FTC-3 COMBUSTION CATALYSTS
MATERIAL COMPATIBILITY
These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors beyond our control, this information should be considered as a general guide, rather than an unqualified guarantee.
TANKS & PIPELINES METERING PUMP WETTED PARTS |
Tanks and pipelines constructed from the following metals
will withstand the effects of the major aromatic solvent vehicle and the active component
of FTC: Stainless steel 316 |
|
HOSES & PIPING |
Hoses and piping which will withstand the effects of
aromatic solvents are: Kynar Teflon Polyacetal Nylon II Ryton (200°) Polypropylene |
|
PUMP DIAPHRAGMS |
Teflon-coated Viton has proven the most successful in withstanding the effect of solvents |
Fuel Technology Pty. Ltd.
ACN 100 293 4902 Tipping Road, Kewdale, Western Australia, 6105
Telephone (08) 9353; 1016 Facsimile (08) 9353 1013; Email fueltech@iinet.net.au
60 Formation Street, Wacol, Queensland, 4076. Telephone (07) 3271 4138 Facsimile (07) 3271 5739